Genuine Brivis evaporative cooler controllers and wall controls, in stock and dispatched fast Australia-wide. Choose the controller that matches your cooler range, then check the part number on the back of your old controller before ordering.

Which Brivis controller do I need?

  • NC-6 Networker controller (PN B022890) – the digital wall controller used across the Brivis evaporative range. Listed separately for Brivis Contour, Promina, Advance and AD coolers so you can find the version for your model. $245.
  • Manual wall controller (PN B019223) – a simple manual control for Brivis evaporative coolers. $73.95.

Before you replace a Brivis controller

A blank or faulty controller is not always the controller itself. Check power to the cooler, the controller cable and plugs, and any fault code shown. If the cooler’s control module has failed, a new controller will not fix it.

Not sure which controller you have? Read our Brivis controller guide covering the NC-6 Networker, control boxes and network modules, or browse all Brivis evaporative cooler parts.


About Brivis evaporative cooler wall controllers

The wall controller is the unit you use to turn the cooler on and off, set the fan speed and switch between cooling and fan-only modes.

Controllers must match the cooler's control system, so check the model name on your existing controller or the cooler's model plate before ordering. If the display is blank or the cooler doesn't respond, check the power and the cable to the cooler before replacing the controller.

Parts in this range include Brivis Evaporative Cooler Manual Wall Controller - #B019223, Brivis Wall Networker Controller NC6 / NC-6 / N-C6 Networker Thermostat - #B022890.

Not sure which part you need? Contact us with your cooler's model number and we'll help you find the right part.

Shop by model series

AD SeriesF SeriesL SeriesP Series

Shop related Brivis parts

Helpful guides