Older Bonaire evaporative cooler models are still common on Australian roofs, and most of their parts are still available. The hard part is usually working out which model you have. This guide shows where to find your model code, what the common Bonaire and Celair series codes are, and which parts fit each one.
Ready to order? Shop all Bonaire & Celair evaporative cooler parts: in stock and dispatched fast Australia-wide.
Where to find your Bonaire model number
Every Bonaire and Celair cooler has a compliance (rating) plate on the cabinet. It is usually near the electrical or control box, behind a pad frame or access panel. Turn the cooler off at the isolator before opening it.
The model code is a group of letters, often followed by a number, for example QP550, SB450 or VSM65. The letters tell you the series. The number usually relates to the size of the cooler.
Old Bonaire and Celair model series and matching motors
Bonaire variable-speed fan motors are shared across many series. Find the letters from your compliance plate below to go straight to the motor listed for that series.
| Series code on plate | Matching variable-speed motors |
|---|---|
| BBM | 950W motor |
| CP | 750W motor, 600W motor, undefinedW motor |
| DF | 750W motor, 600W motor, undefinedW motor |
| LP | 750W motor, 600W motor |
| QE | 600W motor |
| QF | 750W motor |
| QP | 950W motor, 750W motor, 600W motor |
| SB | 750W motor |
| SBB | 950W motor, 600W motor |
| SBM | 600W motor |
| SBS | 750W motor, 600W motor |
| VSH | 950W motor |
| VSL | 950W motor |
| VSM | 950W motor |
| VSS | 600W motor |
Not on the list? Many older Bonaire coolers were also sold under the Celair name, and ranges such as Integra, Integra II, Summer Breeze and Durango use many of the same water parts.
Can’t find the model plate? Use the part number
If the plate is faded or missing, check the old part itself. Most Bonaire parts have the part number printed or stamped on them, for example 6001336SP on a dump valve or 0160185SP on a capacitor. Search that number on our site, or send us a photo of the old part and we’ll help you match it.
Parts that most often need replacing on older Bonaire coolers
- Solenoid valves: the tank won’t fill or keeps overflowing.
- Dump valves and Aquamiser valves: water leaking from the drain or the tank won’t empty.
- Water pumps such as the Fasco JRM38 pump: dry pads and warm air.
- Fan motors: humming, no airflow or a burning smell.
- Cooler pads: smells, poor cooling or pads crumbling.
- Navigator and wall controllers: blank screen or no response.
Own an SSB or Integra cooler? The H2O Optimiser upgrade kit replaces the older water-management parts.
Frequently asked questions
Can I still get parts for an old Bonaire cooler?
Yes. Most water parts, pumps, motors, pads and controllers are still available for older Bonaire and Celair coolers, including QP, SB, SBB and VSM series.
Are Celair and Bonaire parts the same?
Many are. Celair coolers were made by the same company (Climate Technologies) and share many parts with Bonaire coolers. Always match the part number or model code before ordering.
What does the number in my Bonaire model code mean?
The letters identify the series and the number usually relates to the size of the cooler. Use the full code, letters and number, when matching parts.
Not sure what you need? Read our Bonaire evaporative cooler parts guide or our Bonaire fault finder.

